Page 1
USER’S GUIDE Installation, Operation, and Maintenance for your product. Built-In Beverage Refrigerator Model - ABR151SGRH / ABR151SGLH www.avallon.com V2.3-03102020...
Page 2
Important Safety Information Improper handling can cause serious damage to the Avallon beverage refrigerator and/or injury to the user. This beverage refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the rating label located on the rear panel of the unit for electrical and other technical data related to this unit.
Page 3
GENERAL SAFETY • To prevent back and other types of injuries, use at least two people to move and install the beverage refrigerator. • This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents Important Safety Information….………………………………………………………………………………………………………………………………………………ii Table of Contents………………..………………………………………………………………………………………………………………………………....iv First Time Operating Instructions:………………………………………………………………………………………………………………………………………………….v Introduction……………………………………………………………………………………………………………………………………………………………………………1 Parts Identification…………………………………………………………………………………………………………………………………………………………………2 Full View……………………………………………………………………………………………………………………………………………………………… 2 Empty View…………………………………………………………………………………………………………………………………………………………………. 2 Carbon Filter…………………………………………………………………………………………………………………………………………………………………………………. 3 Internal Fan……………. ……………………………………………………………………………………………………………………………………………………………..……..3 Installing Your Beverage Refrigerator……………………………………………………………………………………………………………………………..4 TYPES OF INSTALLATION.……………………………………………………………………………………………………………………………………………. 4 Free-standing Installation……………………………………………………………………………………………………………………………………………………………… 4 Built-in Installation……………………………………………………………………………………………………………………………………………………………………….. 4 Installation Requirements……………………………………………………………………………………………………………………………………………...
Specifications…………………………………………………………………………………………………………………………………………………………………………… 13 Avallon Product Warranty……………………………………………………………………………………………………………………………………………………............................. Error! Bookmark not defined. First Time Operating Instructions: Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you need to move or ship the appliance in the future.
Introduction Thank you for purchasing your Avallon beverage refrigerator. Avallon is dedicated to developing products that will enhance your lifestyle with superior quality and distinctive features. Please visit www.avallon.com for more information on your product and other Avallon products. This manual contains important information regarding the proper installation, use, and maintenance of your beverage refrigerator.
Back View Carbon Filter A built-in carbon filter protects your beverages by acting as a natural barrier against harmful odors. Internal Fan This is an air-cooled unit equipped with an internal fan that maintains a consistent internal temperature. Note: The carbon filter should be replaced every 3-6 months depending on the unit’s exposure level to odor.
Installing Your Beverage Refrigerator The beverage refrigerator should be installed in accordance with local electrical code requirements. It should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before you plug the beverage refrigerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Installation Requirements: When installing the beverage refrigerator under a counter, follow the recommended spacing dimensions shown. • To ensure proper service access and ventilation, allow between 1-2” of clearance at the back as shown in the diagram. • The installation should allow the unit to be pulled forward for servicing, if necessary. •...
RECOMMENDED GROUNDING METHOD: For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3- pronged wall socket, and grounded in accordance with the National Electrical Code and local codes and ordinances.
REMOVING THE SHELVES: 1. Open the door completely. 2. Make sure the shelf is pushed back completely. 3. Lift either the left or right side of the shelf to create a 45◦ angle from its original position. Make sure not to lift either side of the shelf too hard as it may come in contact with the inner wall mount.
Operation INSTALLATION CHECK-LIST BEFORE OPERATION: 1. Have all packing materials and tape been removed from the interior and exterior of the beverage refrigerator? 2. Have the installation instructions been followed, including connecting the machine to electricity? 3. Has proper grounding been installed for the beverage refrigerator? 4.
Note: Pressing and holding the increase and decrease temperature buttons at the same time will switch the temperature display from °F to °C. Tip: If you powered the unit off, please wait at least five (5) minutes before powering it back on. Warning: Allow at least 24 hours for your beverage refrigerator to run before storing your beverages and to allow the temperature to acclimate.
Defrosting Note that under most refrigerating settings, the unit will automatically defrost under most ambient conditions. However, on colder settings, some frost may build up. Additionally, the more humid the ambient conditions, the more frost may build up. Keep the door closed as much as possible and avoid opening the door unnecessarily to minimize frost build-up.
Preparing Your Beverage Refrigerator for Storage If the beverage refrigerator will not be used for a long time, or is to be moved to another place, it will be necessary to defrost the unit and dry the interior. 1. Disconnect the refrigerator from the power supply by removing the power plug from the wall socket. 2.
Page 17
ISSUE POSSIBLE CAUSE SOLUTION The beverage refrigerator will not The refrigerator has restricted air Open up space in the cabinet to reach the desired temperature. flow due to too much storage. allow air flow. The refrigerator is placed too Keep the refrigerator away from close to a heat source.
Page 18
Specifications Product Type Built-In Beverage Refrigerator Model ABR151SGRH / ABR151SGLH Voltage/Frequency AC 115 / 60 Hz Amperage 1.5 A Input Power 120 W Color Black Cabinet with Stainless Steel Door Storage Capacity 86 Cans* Refrigerant R600a, 1.06 oz. Temperature Range 34°...