Whirlpool WFW9620HW0 Use And Care Manual page 16

15.
Remove garments promptly
after cycle is finished
After a wash-only cycle, promptly remove
garments after cycle has completed to
avoid odor and rusting of metal objects on
garments. When unloading garments, pull
back the door seal and check for small items between the tub
and the washer drum.
If you will be unable to remove the load promptly after a wash-
only cycle, use the FanFresh
After a wash and dry cycle or a dry-only cycle, promptly
remove garments after cycle has completed to reduce wrinkling.
NOTES:
This washer has a tight seal to avoid water leaks. To avoid
n
odors, leave the door open to allow the washer to dry
between uses.
If a dry cycle is interrupted and the load removed before
n
the cool-down period at the end of the cycle, the load will
be very hot.
16
option (see Step 11).
®
Setting a delayed start
4:28
What to Wash
REGULAR
Temperature Spin Speed
WARM EXTRA FAST
Touch POWER until the indicators turn on. From the home
screen, make sure the washer is set to the correct time and
date (if it is not, see Step 12 for instructions on how to set the
time and date).
Touch the clock icon on the far right portion of the touch
screen. The "Select a start time" screen will show on the
display. Scroll horizontally to select a preferred start time
for your wash cycle. The times will display in 15-minute
increments up to 8 hours. Touch OKAY to set the start time.
The display will return to the home screen and the clock icon
will turn brown.
To delete or modify the delayed start, touch the clock icon
again and follow the screen prompts.
3:15
How to Wash
NORMAL
Auto Dry
Dry