Step 3 Inserting A Cassette - Sony DCRPC120 Operating Instructions Manual

Step 3 Inserting a cassette

(1) Install the power source.
(2) Slide OPEN/Z EJECT in the direction of the arrow and open the lid.
(3) Push the middle portion of the back of the cassette to insert.
(4) Close the cassette compartment by pressing the
(5) After the cassette compartment goes down completely, close the lid until it
2
To eject a cassette
Follow the procedure above, and take out the cassette in step 3.
Notes
•Do not press the cassette compartment down forcibly. Doing so may cause a
malfunction.
•The cassette compartment may not be closed when you press any part of the lid other
than the
When you use cassette with cassette memory
Read the instruction about cassette memory to use this function properly (p. xx).
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
18
The cassette compartment automatically lifts up and opens.
Insert the cassette in a straight line deeply into the cassette compartment with
the window facing out.
compartment. The cassette compartment automatically goes down.
clicks.
OPEN/Z EJECT
mark.
3, 4
mark on the cassette
5