Sony SLV-M11HF Manual page 6

Step 2: Setting up the remote commander (continued)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• Some Sony AV receivers may not be operated with the remote commander.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your TV
is listed in the table below, set the appropriate manufacturer's code number.
1
Set TV RECEIVER / VIDEO at the top of the remote commander to
TVRECEIVER .
2
Hold down `/1, and enter your TV's code number(s) using the number
buttons. Then release `/1.
Now you can use the `/1, VOL +/–, CH +/–, and TV/VIDEO buttons to
control your TV. You can also use the buttons marked with a dot (•) to control
a Sony TV. To control the VCR, reset TV RECEIVER / VIDEO to VIDEO .
6