Sony SLV-M11HF Manual page 56

Setting up the VCR Plus+ GOLD system (continued)
Notes
• When using a cable box, make sure to leave it on.
• It takes about 1 hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL
CODE in your area.
• When you move to a different area, you must set up the VCR again and enter your
new ZIP/POSTAL CODE in the EASY SET UP procedure.
56