Step 2: Setting Up The Remote Commander - Sony SLV-M11HF Manual

Step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and – on the batteries
to the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive (+)
end clicks into position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV or AV receiver.
Buttons on the remote
commander marked with a dot
(•) can be used to operate your
Sony TV.
The RECEIVER VOL +/– and
MUTING buttons can be used to
operate your Sony AV receiver.
To operate
the VCR
a Sony TV or
AV receiver
Set TV RECEIVER / VIDEO to
VIDEO and point at the remote sensor on the VCR
TV RECEIVER and point at the remote sensor on the TV or
AV receiver
Remote sensor
TV RECEIVER /
VIDEO
1 2 3
4 5 6
7 8 9
0
RECEIVER
VOL +/–
MUTING
continued
5