Sony SLV-M11HF Manual page 37

2
Press </, to select AUTO, then press
OK.
PLAY
OK
3
Press </, to select YES, then press OK.
PLAY
OK
4
To activate the Auto Clock Set feature, turn off the VCR.
The VCR automatically sets the clock by searching for a channel that
carries a time signal and sets your time zone and Daylight Saving
Time (if applicable).
If your clock is set to the wrong time zone or Daylight Saving Time,
you can adjust these settings without turning off the Auto Clock Set
feature (page 38).
Notes
• The clock cannot be set automatically if you don't receive a channel that carries a
time signal in your area. If so, set the clock manually.
• If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 30 minutes. If nothing happens even after you
wait about 30 minutes, set the clock manually.
• If you use Hookup 1 or 4, make sure you leave the cable box on.
AUTO CLOCK SET
FULL AUTO YES NO
Use t o s e l e c t
Pu s h MENU t o q u i t
continued
37