Technical Data - AEG HKB95451NB User Manual

Problem
The display shows "E t"
does not shows up when
knobs are opened.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send
this part (if applicable).
B. Stick it on Guarantee Card and keep
this part (if applicable).

9. TECHNICAL DATA

9.1 Hob dimensions
Width
Possible cause
-
Selected Automatic Mode is
A0.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
Remedy
Turn off the control knobs
and wait until the display is
off or disconnect the appli‐
ance to the main to return to
the initial condition.
Refer to "Daily use".
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
8.3 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
C
MOD.
PROD.NO.
SER.NO.
0049
C. Stick it on instruction booklet.
880 mm
ENGLISH 23
TYPE
IP20