Advertisement
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-
attached.
M6 Washer (36)
M8 Washer (41)
M10 Washer (6)
M8 Nylon Locknut (34)
M10 Nylon Locknut (11)
M10 x 70mm Bolt (31)
M6 x 16mm Screw (30)
M6 x 36mm Screw (37)
M10 x 60mm Carriage Bolt (32)
M8 x 55mm Bolt (38)
Advertisement
