Pioneer FH-MG6406ZH X1H Service Manual page 73

- Removing the CD Mechanism (Fig.3)
1. Remove the four screws A and then remove the Holder and Damper.
2. Remove the two spring B, spring C and spring D from the hook.
3. Remove the four screws E and screw F and then remove the Holder.
4. Remove the CD Mechanism from the Chassis.
Holder
A
Damper
- Removing the Tuner Amp Assy (Fig.4)
1. Remove the four screws A.
2. Remove the Heat Sink.
3. Remove the five screws B.
4. Remove the screw C.
5. Straight the tabs at four locations indicated and then
remove the Tuner Amp Assy.
A
Damper
Holder
B
Chassis
C
CD Mechanism
B
E
A A
B
B
C
FH-MG6406ZH
D
E
F
E
Damper
A
Holder
E
Holder
Damper
A
Holder
Holder
Heat Sink
A
A
Fig.4
Tuner Amp Assy
Fig.3
B
B
B
73