Table of Contents
Advertisement
Fuji3.book Page 35 Monday, December 15, 2003 6:34 PM
Troubleshooting
What do I do if my computer won't start?
If your computer comes with a floppy disk drive, make sure the drive is
❑
empty.
If you are using an external display, make sure the display is plugged into a
❑
power source and turned on. Make sure the brightness and contrast controls
are adjusted correctly. See the guide that came with your display for details.
If the computer is plugged into a power strip or uninterruptible power supply
❑
(UPS), make sure the power strip or UPS is turned on and working.
Make sure the computer is securely plugged into a power source or, if you
❑
are using battery power, make sure the battery is inserted properly and
charged. You will know the power is on by the blinking power indicator. If
the computer is properly connected to a power source and still does not
work, follow these steps:
1
Disconnect the AC adapter and remove the battery.
2
Wait one minute.
✍
If your computer has a reset button, you can use a thin, straight object (such as a
paper clip) to press this button to reset the computer. See "Locating Controls and
Ports" on page 17 for a description of the buttons on your computer.
3
Reattach the AC adapter and reinsert the battery.
4
Turn on the power.
❑
Condensation may have accumulated on the computer causing it to
malfunction. If this is the case, wait at least one hour to use the computer.
35
Advertisement
Table of Contents
