Checking The Engine Oil Level - Toro TRX-19 Operator's Manual

Trencher

Hide thumbs Also See for TRX-19:

Operator's manual (48 pages)

Table Of Contents

Table of Contents

In certain conditions during fueling, static

electricity can be released causing a spark

which can ignite the gasoline vapors. A fire

or explosion from gasoline can burn you and

others and can damage property.

• Always place gasoline containers on the

ground away from your vehicle before filling.

• Do not fill gasoline containers inside a

vehicle or on a truck or trailer bed because

interior carpets or plastic truck bed liners

may insulate the container and slow the loss

of any static charge.

• When practical, remove gas-powered

equipment from the truck or trailer and

refuel the equipment with its wheels on the

ground.

• If this is not possible, then refuel such

equipment on a truck or trailer from a

portable container, rather than from a

gasoline dispenser nozzle.

• If a gasoline dispenser nozzle must be used,

keep the nozzle in contact with the rim of

the fuel tank or container opening at all

times until fueling is complete.

Important: Do not use methanol, gasoline

containing methanol, or gasohol containing more

than 10% ethanol because the fuel system could be

damaged. Do not mix oil with gasoline.

Using Stabilizer/Conditioner

Use a fuel stabilizer/conditioner in the machine to

provide the following benefits:

• Keeps gasoline fresh during storage of 90 days or

less. For longer storage it is recommended that the

fuel tank be drained.

• Cleans the engine while it runs

• Eliminates gum-like varnish buildup in the fuel

system, which causes hard starting

Important: Do not use fuel additives containing

methanol or ethanol.

Add the correct amount of gas stabilizer/conditioner

to the gas.

Note: A fuel stabilizer/conditioner is most effective

when mixed with fresh gasoline. To minimize the

chance of varnish deposits in the fuel system, use fuel

stabilizer at all times.

Filling the Fuel Tank

1. Park the machine on a level surface, lower the

boom, and stop the engine.

2. Remove the key and allow the engine to cool.

3. Clean around the fuel tank cap and remove it

(Figure 15).

G007806

1. Fuel tank cap

4. Add unleaded gasoline to the fuel tank, until the

level is 1/4 to 1/2 inch below the bottom of the

filler neck.

Important: This space in the tank allows

gasoline to expand. Do not fill the fuel tank

completely full.

5. Install the fuel tank cap securely.

6. Wipe up any gasoline that may have spilled.