Gigafast PE 903-EB User Manual page 13

After the installation is complete, click on the 'Finish' button and you will be
asked to restart the computer for it to take full effect.
Click the 'Yes' button to restart computer or you can choose to restart the
computer later. If so, click on the 'No' button.
Proceed the below steps to install the HomePlug Ethernet Bridge.
• Plug your network cable into the computer's RJ-45 network adapter port
• Plug the other end of your network cable into the RJ-45 port on any port
on this 4-port HomePlug Ethernet Bridge
• Plug your Home Ethernet Bridge directly into a power outlet on the wall
13