Gigafast PE 903-EB User Manual page 12

Process the next step to install the HomePlug Ethernet Bridge.
Plug your network cable into the computer's RJ-45 network adapter port
Plug the other end of your network cable into the RJ-45 port locate at the
bottom of the HomePlug Ethernet Bridge
Plug your Home Ethernet Bridge directly into a power outlet on the wall
**Note: ** Do not plug the device into a UPS or power strip with surge protection.
The HomePlug Ethernet Bridge has its own power filter for protection against
surges.
Click 'OK' when the unit is connected physically.
12