Philips HDR3800/31 User Manual page 18

Connect to satellite receiver/ cable
box
1
Ensure that the device is connected to the
TV with an antenna cable.
EXT 2
TO VCR/SAT
OUT
IN
VIDEO AUDIO
RF S-VIDEO
R L
2
Connect a scart cable (not supplied) from
the EXT2 TO VCR/SAT scart socket to
the scart output socket on the cable box/
satellite receiver.
Tips
•
When using this connection, automatic channel
search is not required. Read the chapter "Get
started".
•
The scart socket on the device may be labelled as TV
OUT or TO TV.
18 EN
TO TV
TO TV
Connect the G-Link cable
With the G-link cable, you can control the
satellite receiver/ cable box for timer recording
through the GUIDE Plus+ system.
1
Connect the supplied G-LINK cable to the
G-LINK socket on the recorder.
2
Place the G-LINK transmitter in front of
the cable box/ satellite receiver facing its IR
sensor (remote sensor) so that its infrared
detector can receive a clear signal.