Table of Contents
Advertisement
Items
Fragment Threshold
RTS Threshold
Beacon Interval
Preamble Type
RF Output Power
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
3.4.3 Security
The Security function protects your wireless network from invasion. We provide WEP and WPA
encryption to secure your wireless network. Please select "Disable" , "WEP" , "WPA" , "WPA2",
or "WPA2-Mixed" in the drop list. If you select "Disable", any data will be transmitted without
encryption and any station can access the router.
Information
This value should remain at its default setting of 2346. If you
experience a high packet error rate, you may slightly increase your
fragmentation threshold within the value range of 256 to 2346.
Setting the fragmentation threshold too low may result in poor
performance.
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 0 and 2347 are
recommended.
Beacons are packets sent by an access point to synchronize a
wireless network. Specify a beacon interval value. Default (100ms)
is recommended.
The length of CRC blocks in the frames during the wireless
communication.
Select the signal strength for the wireless network.
20
Wireless 11n 1T1R Router
Advertisement
Table of Contents
