Related Manuals for Netronix W142C
Summary of Contents for Netronix W142C
- Page 1 Wireless 11n 1T1R Router IEEE 802.11n Wireless Series Wireless 11n 1T1R Router W142C W142D User Manual Version 2.1 Date: October 20, 2010...
- Page 2 Wireless 11n 1T1R Router FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Wireless 11n 1T1R Router CE Mark Warning This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class B for ITE, the essential protection requirement of Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and R&TTE Directive 1999/5/EC...
-
Page 4: Table Of Contents
Wireless 11n 1T1R Router Contents Unpacking Information ········································································································ 5 Chapter 1 Introduction to the Wireless Router ······························································· 6 General Description······················································································· 6 Key Features ································································································· 6 The Front Panel····························································································· 7 The Rear Panel ····························································································· 8 Chapter 2 Installation and Basic Configuration ······························································ 9 Operation Mode·····························································································... -
Page 5: Unpacking Information
Wireless 11n 1T1R Router Unpacking Information Thank you for purchasing the product. Before you start, please check all the contents of this package. The product package should include the following: 1. One Wireless Router 2. One USB cable 3. One CD Note: Make sure that the package contains the above items. -
Page 6: Introduction To The Wireless Router
Wireless 11n 1T1R Router Chapter 1 Introduction to the Wireless Router 1.1 General Description This is a wireless router with 1T1R SISO technology, providing an excellent network solution for home, SOHO and hotspot users. It complies with standards IEEE 802.11n with data rate up to 150 Mbps, and IEEE 802.11b/g with maximum data rate of 54 Mbps. -
Page 7: The Front Panel
Wireless 11n 1T1R Router 1.3 The Front Panel The front panel of the Wireless Router: Name Status Indication Green Power on Dark Power off Blink green one time System reboot Blink green WPS connecting Dark System stability The wireless function is disabled. WLAN Flashing The wireless function is enabled. -
Page 8: The Rear Panel
Wireless 11n 1T1R Router 1.4 The Rear Panel The rear panel of the Wireless Router is shown below. LAN: Through this port, you can connect the router to your PCs and the other Ethernet network devices. WAN: This WAN port is where you will connect the cable/DSL Modem, or Ethernet. ... -
Page 9: Installation And Basic Configuration
Wireless 11n 1T1R Router Chapter 2 Installation and Basic Configuration This chapter will guide you steps by steps to install and configure the Wireless Router. We suggest you go over the whole chapter first and then do more advanced operation. Operation Mode In this device, there are three modes for your selection: ... -
Page 10: Configure The Ip Address Of Your Computer
Wireless 11n 1T1R Router Configure the IP Address of Your Computer In order to communicate with this Wireless Router, you have to configure the IP address of your computer to make it compatible with the device. Note: The router supports DHCP server and it is enabled as default. Users who configure his IP address as “Obtain an IP address automatically”... - Page 11 Wireless 11n 1T1R Router 2. Right-click Local Area Connection item and click Properties. 3. Choose Internet Protocol (TCP/IP) and click Properties.
- Page 12 Wireless 11n 1T1R Router You may choose Obtain an IP address automatically (recommend) to get an IP address automatically. Or you can choose Use the following IP address to specify an IP address manually. Please click the OK button after your configuration.
-
Page 13: Web-Based Management
Wireless 11n 1T1R Router Chapter 3 Web-Based Management Start the Web-Based Management Interface The device uses Web as the management interface. You can use a browser to access the management interface easily. Please follow the steps listed below. 1. Open the Internet Web browser. 2. -
Page 14: The Graphic User Interface
Wireless 11n 1T1R Router The Graphic User Interface After the password authorization, the information page shows up as the home page of the graphic user interface. You may click the menu link on left column of the window to get access to each configuration page. - Page 15 Wireless 11n 1T1R Router AP Mode: Client Mode:...
-
Page 16: Setup Wizard
Wireless 11n 1T1R Router Setup Wizard (Router mode and Client mode) If you are using the router for the first time, please follow the procedures of the setup wizard to do a step-by-step configuration. Note: The configurations in AP, Router and Client modes are almost the same. The following guide mainly introduces this device under the Router mode environment. -
Page 17: Wireless
Wireless 11n 1T1R Router Wireless 3.4.1 Basic Settings You can set up the configuration of your Wireless basic settings and monitor the Wireless Clients associate with your router. Items Information Disable Wireless Mark the checkbox to disable interface of Wireless LAN. LAN Interface button is to show and update the wireless settings Multiple AP... - Page 18 Wireless 11n 1T1R Router Click "Show Active Clients" button, then an "Active Wireless Client Associated Client Table" will pop up. You can see the status of all active wireless stations that are connecting to the access point. * Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations. 1.
-
Page 19: Advanced Settings
Wireless 11n 1T1R Router 2. Active Wireless Client Table This is the window that pops up after clicking the button. 3.4.2 Advanced Settings You can set advanced wireless LAN parameters for this router. We recommend not changing these parameters unless you know what changes will be on this router. -
Page 20: Security
Wireless 11n 1T1R Router Items Information This value should remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase your Fragment Threshold fragmentation threshold within the value range of 256 to 2346. Setting the fragmentation threshold too low may result in poor performance. - Page 21 Wireless 11n 1T1R Router Items Information Please choose a SSID you have set for this router in the Wireless > Select SSID Basic Settings from the drop-down list. The SSID will be shown on the wireless network for recognizing. There are 5 modes for you to select: Disable, WEP, WPA, WPA2, Encryption and WPA2-Mixed.
- Page 22 Wireless 11n 1T1R Router Items Information Please choose a SSID you have set for this router in the Wireless > Select SSID Basic Settings from the drop-down list. The SSID will be shown on the wireless network for recognizing. Select a security encryption mode for this router. Encryption Authentication There provide three options for selecting: Open System, Shared Key,...
- Page 23 Wireless 11n 1T1R Router WPA2 Cipher Suite: the defaulting setting is AES Pre-Shared Key To decide the format, select “Passphrase” or “Hex” in the drop list. Format Enter the “Pre-shared Key” according to the pre-shared key format Pre-Shared Key you select. This is the shared secret between AP and STA. This field must be filled with character longer than 8 and less than 64 lengths.
-
Page 24: Access Control
Wireless 11n 1T1R Router 3.4.4 Access Control To restrict the station access authentication of the clients, you can set up the control list in this page. Items Information Click the drop list to choose the access control mode. You may select Wireless Access “Allow listed”... -
Page 25: Wps Settings
Wireless 11n 1T1R Router network with others successfully. Click the “Refresh” button can scan nearby Router and AP again. 3.4.6 WPS Settings The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security setup and management of Wi-Fi networks. This router supports the configuration setup using PIN configuration method or PBC configuration method through an internal or external registrar. - Page 26 Wireless 11n 1T1R Router Items Information Disable WPS Click this checkbox to undo WPS. You cannot manually select the items here. The WPS Status will change from “UnConfigured” to “Configured” after you enable WPS function and WPS Status setup a wireless security key for this device. If you use this device as a client, you can use this code when trying to Self-PIN Number connect this device to other AP by using the PIN method.
-
Page 27: Tcp/Ip Settings
Wireless 11n 1T1R Router Items Information Disable WPS Mark to disable the WPS, and clear to enable. If you use this device as a client, you can use this code when trying to connect this device to other AP by using Self-PIN Number the PIN method. -
Page 28: Wan Interface Setup
Wireless 11n 1T1R Router DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP addresses “automatically”. This field asks you to specify the DHCP Client IP address range (default 100~200). You can also click the “Show Client” button to list DHCP Client Range those connected DHCP clients. - Page 29 Wireless 11n 1T1R Router Items Information Select the mode to access the WAN as Static, DHCP Client or WAN Access Type PPPoE. To Enable the Maximum Transmission Unit of router setup. Any packet over this number will be chopped up into suitable size MTU Size before sending.
- Page 30 Wireless 11n 1T1R Router your network card in the computer. Note: The 'History MAC Table' can save maximum three MAC Addresses. To Delete the MAC Address you add before, mark the check box in the select item on the right hand and click the “Delete History MAC Table Selected”.
- Page 31 Wireless 11n 1T1R Router 2. DHCP (Auto Config) Items Information To Enable the Maximum Transmission Unit of Router setup. Any packet over this number will be chopped up into suitable size before sending. Larger number will enhance the MTU Size transmission performance.
-
Page 32: Firewall Settings
Wireless 11n 1T1R Router Items Information User Name&Password Fill in the User Name and password that provided by your ISP. To Enable the Maximum Transmission Unit of router setup. Any packet over this number will be chopped up into suitable size before sending. -
Page 33: Management
Wireless 11n 1T1R Router Items Information Enable MAC Filtering Mark to enable the configuration, and clear to disable. Fill in the MAC address of wireless stations you want to MAC Address forbid to access the Internet through the Gateway. Input any text to describe this mapping. Comment Lists the MAC Filter Settings you have added before. -
Page 34: Statistics
Wireless 11n 1T1R Router 3.7.2 Statistics This page shows users the information of data transfer, and monitors the status of this router including receiving and sending packets. To see the latest report, click button. 3.7.3 Log This System Log page shows the information of the current activities on the router. To enable system log function: Mark the “Enable Log”... -
Page 35: Upgrade Firmware
Wireless 11n 1T1R Router 3.7.4 Upgrade Firmware Sometimes a new firmware may be issued to upgrade the system of this device. You could upgrade the firmware you got in this page. To upgrade the firmware, please click the button, locate the firmware in your computer and then click the button to execute. -
Page 36: Save/Reload Setting
Wireless 11n 1T1R Router 3.7.5 Save/Reload Setting The Save/Reload Setting page allows users to save and upload the configuration settings of the device or restore the factory default configuration. Items Information Click the button to save the currently configure Save Settings to File settings. -
Page 37: Logout
Wireless 11n 1T1R Router 3.7.7 Logout Click Apply Change then you will save the settings and log off the management interface. -
Page 38: Appendix A: Product Specifications
Wireless 11n 1T1R Router Appendix A: Product Specifications IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE Standard 802.3u LAN: One 10/100Mbps RJ-45 port WAN: One 10/100Mbps RJ-45 port Interface One WPS/RESET button One slide switch to control AP/Router/Client mode One USB DC JACK Antenna type: Dipole Antenna(W142D) -
Page 39: Appendix B: Glossary
Wireless 11n 1T1R Router Appendix B: Glossary 802.11b - The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. - Page 40 Wireless 11n 1T1R Router Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standards group promoting interoperability among 802.11b devices. WLAN (Wireless Local Area Network) - A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area.