Netronix W142C User Manual page 18

Associated Client
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
1. Multiple APs
This is the window that pops up after clicking the
Click "Enable" to activate this AP, and then click the button "Show", "Active Wireless Client Table –
AP1" window pops up as the following:
Click "Show Active Clients" button, then an "Active Wireless Client
Table" will pop up. You can see the status of all active wireless stations
that are connecting to the access point.
Wireless 11n 1T1R Router
button.
18