Page 1
SE112-BT1 Shure Bluetooth Earphones Wearing the Earphones The following are some suggested ways of wearing the earphones. Over the ear Inserting the Earphones Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.
Replace sleeves if they do not tightly grip the nozzle. To ensure • Slide on a new sleeve so that it completely covers the barb and the proper fit and performance, use only sleeves supplied by Shure (unless using nozzle. custom molded sleeves).
Shure Incorporated SE112-BT1 Shure Bluetooth Earphones Choosing a Sleeve Soft flex sleeves are included in small, medium, and large sizes. Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove.
LED flashes blue and red. ® Bluetooth Pairing 2. From your audio source, select "Shure BT1." 3. LED turns blue when successfully paired. For additional pairing options, please visit http://www.shure.com/earphones. Charging the Earphones Red LED indicates low battery.
• Follow instructions from manufacturer. Note: Battery replacement to be performed only by Shure authorized service • Product battery may explode or release toxic materials. Risk of fire or personnel.
Page 6
® The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners. Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately.
Email: EMEAsupport@shure.de Specifications Antenna Type Chip Antenna Gain +2.13 dBi Bluetooth 4.1 Frequency 2402 to 2480 MHz Modulation Type FHSS RF Output Power +5.38 dBm (E.I.R.P) Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com...