Table of Contents
Advertisement
Quick Links
Introduction
The Full Motion Easy-Adjust Universal Tablet Mount
enables you to mount smartphones or tablets
onto desktops or other smooth surfaces easily
and quickly.
Specifications
•
Product weight: 1.10 lbs
•
Device holder adjustment: 4.7" to 8.2"
•
Loading weight capacity: <= 2.20 lbs
•
C-clamp adjustment: 0.27" to 1.49"
•
Height (from base to center of holder): 18"
LOT Number Sticker
For future product return or exchange, this LOT number
is required. Please keep it for your reference.
04-1030B
Full Motion Easy-Adjust
Universal Tablet Mount
Installation Guide
LOT Number
Part Number
1
Advertisement
Table of Contents
Related Manuals for SIIG CE-MT1X12-S1
Summary of Contents for SIIG CE-MT1X12-S1
- Page 1 Full Motion Easy-Adjust Universal Tablet Mount Installation Guide Introduction The Full Motion Easy-Adjust Universal Tablet Mount enables you to mount smartphones or tablets onto desktops or other smooth surfaces easily and quickly. Specifications • Product weight: 1.10 lbs • Device holder adjustment: 4.7" to 8.2" •...
- Page 2 Key Features and Benefits • Full motion articulating tablet desktop mount frees your hand from holding the devices and maximizing the conveniences while reading or watching videos • Retractable holding bracket expands up to 8.2" with side openings allows easy device installing/removing and cable connection •...
-
Page 3: Package Contents
Package Contents • Full Motion Easy-Adjust Universal Tablet Mount - Black/White • C-clamp • Suction cup • Wire clip (x4) • 3-in-1 allen key • Installation Guide Layout 6.89" 11.61" 9.92" 4.72"~8.27" 4.53" 3.94" Figure 1: Full Motion Easy-Adjust Universal Tablet Mount... -
Page 4: Installation Instructions
Installation Instructions C-clamp Mount Position the C-clamp to the desktop and adjust it according to the thickness of the desktop by turning the clamp screw. Tighten the C-clamp to the desktop by turning the clamp screw clockwise. clamp screw Figure 2... -
Page 5: Suction Cup Mount
Suction Cup Mount Disconnect the wall stand from the C-clamp by releasing the bolt. Connect the wall stand into the hole of suction cup. Use the included bolt and fasten it. Place the wall stand on a smooth flat surface and press the semi-circle locker to secure the mount. - Page 6 Adjustment & Cable Management Rotation Adjust to the desired position using the included 3-in-1 allen key. 2.5mm 2.5mm 2.5mm 3-in-1 allen key Figure 4...
-
Page 7: Device Holder
Device Holder Adjust the width to fit your tablet or smartphone. Figure 5 Cable Management Arrange the cables into the cable covers and down the tube using the included wire clips. Figure 6... -
Page 8: Maintenance
Maintenance After a period of time, the suction cup will lose holding strength due to the accumulation of dirt and dust. It is recommended to remove and clean the suction cup with cold water every 2 months to maintain proper holding strength. Figure 7... - Page 9 Notice • DO NOT assemble/disassemble the Tablet Mount by yourself • DO NOT wash with hot water • DO NOT place the suction cup on a rough surface or one prone to vibration or movement, as these conditions may cause the mount to fall unexpectedly •...
- Page 10 Blank Page...
-
Page 11: Technical Support And Warranty
(2) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. - Page 12 Full Motion Easy-Adjust Universal Tablet Mount - Black/White is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the CE-MT1X12-S1 and is the answer not in the manual?
Questions and answers