SIIG CE-MT2X11-S1 Installation Manual

Read the entire instruction manual before you start installation and assembly. If you have
any question regarding any of the instructions or warnings, please contact us.

Unpacking

Carefully remove the contents and lay them out on cardboard or other protective surface

Check package contents against the parts list to ensure that all components are received

undamaged. Do not use damaged or defective parts
Ensure that you have received all parts according to the component checklist prior to

installation. If any parts are missing or faulty, please contact us.
CAUTION:
Mount must be attached as specified in assembly instructions. Improper installation may

result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by

professionals.
This product is designed to be installed on wood stud walls, solid concrete walls or brick

walls.
Make sure that the supporting surface will safely support the combined weight of the

equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws

This product contains small items that could be a choking hazard if swallowed. Keep these

items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to

product failure and personal injury.

MAINTENANCE

Check that the bracket is secure and safe to use at regular intervals (at least every three months)

Support

For more info or tech support
http://www.siig.com/support
Dual Monitor Gas Spring
Desk Mount with USB Port
Installation Guide
P/N: CE-MT2X11-S1
04-1201A