Table of Contents
Advertisement
SETTING OVEN CONTROLS
Adjusting the oven temperature
Your appliance has been factory calibrated and tested
to ensure an accurate baking temperature. For the first
few uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so the oven cooks hotter or cooler than
the temperature displayed.
To adjust oven temperature
1. Press
.
2. Set the temperature to 550°F (287°C) by pressing and
holding the
keypad.
3. Within 2 seconds, press and hold
2 digit display appears. Release
display now indicates the amount of degrees offset
between the original factory temperature setting and
the current temperature setting. If the oven control
has the original factory calibration, the display will
read "0."
4. The temperature can now be adjusted up or down
35°F (19°C), in 5°F increments by pressing and
holding the
or
amount of offset appears in the display. When
lowering the oven temperature, a minus sign (-) will
appear before the number to indicate that the oven
will be cooler by the displayed amount of degrees.
5. When you have made the desired adjustment, press
to go back to the time of day display.
NOTES
• Any oven temperature offset made will not affect the
broil or self-cleaning feature temperatures.
• If the oven display has been set to display Celsius,
adjustments made will be in 1°C increments with
each press of the
• DO NOT USE oven thermometers such as those
found in grocery stores to check the temperature
settings inside the oven. These oven thermometers
may vary as much as 20 to 40 degrees from actual
temperatures.
22
until the
keypad. The
keypad. Adjust until the desired
or
keypad.
Operating the oven light
The interior oven light will automatically turn ON when the
oven door is opened.
Press
to turn the interior oven light ON and OFF
whenever the oven door is closed.
The interior oven light is located at the upper left rear
wall of the oven interior and is covered with a glass shield
held by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven light, see "Changing the oven
light" in the Care & Cleaning section.
Advertisement
Table of Contents
