Advertisement
TTB516NAL
by TITAN
GB
IE
Inserting Nails
Only use the nails/staples which are outlined in the technical specifications.
Please keep in mind that nails must be suited to the material they are used in.
The harder the material is, the shorter the nails should be.
1. Press lever (1) while pulling slider (9) backwards
2. Insert the nail strip into magazine (8) with heads facing upward (maximum
capacity 100/nails)
3. Push slider (9) against nailer head (4) until it snap locks.
4. When inserting a nail strip, it rests against the magazine side which
correponds with the nail symbol on nailer head (4).
4
32mm
25mm
20mm
15mm
11
A
C
B
Fig. 1
1
Fig. 2
Before you start
Advertisement
