Do you have a question about the TTB517STP and is the answer not in the manual?
Questions and answers
Edward Craven
July 4, 2025
i have a Titan TTB517STP nail/ staple gun , can you tell me which staples and and nails i should use please
kind regards
Mr Craven ‘from Laceby Grimsby
Page 1
25mm Nailer/Stapler TTB517STP Barcode: 5052931216253 WARNING! Read the instructions before using the product!
Page 2
GUARANTEE This TITAN product carries a 2 year guarantee. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.
TTB517STP by TITAN Let’s get started… These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Your product Technical and legal information Before you start more detail... Product functions...
TTB517STP by TITAN Technical and legal information Technical specifications General > Input Voltage : 230 -240V, 50 Hz, 9A > Max.Firing speed : 20-Nails/Staples- per minute > Max.Length of nail : Up to 25mm long : 15-25mm long > Length of staples : Holds up to 100 nails or 100 staples Max.Magazine Capacity...
Page 6
TTB517STP by TITAN Technical and legal information This tool may cause hand-arm vibration syndrome if its use is not adequately managed Warning! identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
TTB517STP by TITAN Technical and legal information yyWxx Manufacturing date code; year of manufacturing (20yy) and week of manufacturing (Wxx); Caution / Warning. Wear hearing protection. Read the instruction Wear eye protection. manual. Wear respiratory protection. This product is of protection class II. That means it is equipped with enhanced or double insulation.
Page 8
TTB517STP by TITAN Technical and legal information 2) ELECTRICAL SAFETY > Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Page 9
TTB517STP by TITAN Technical and legal information > Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Page 10
TTB517STP by TITAN Before you start Unpack > Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
TTB517STP by TITAN Before you start Inserting Nails and Staples Only use the nails/staples which are outlined in the technical specifications. Please keep in mind that nails/staples must be suited to the material they are used in. The harder the material is, the shorter the staples or nails should be.
TTB516NAL by TITAN Product functions Intended use The machine is intended for tacking of cardboard, insulating material, fabric, thin plywood, foils, leather and similar materials and similar materials on wooden surfaces or similar e.g. mdf, plywood; when used in accordance with these instructions.
TTB517STP by TITAN Product functions Operating the tool > Firmly press nailer head (4) against the workpiece until there is no gap between the nailer head (4) and the workpiece. > Briefly press trigger (7) and then release again. >...
Page 15
TTB517STP by TITAN Product functions Impact control With wheel (3) the required impact level can be selected in steps. > Indicator (3) shows the selected impact level. > “-” for thin and light materials such as foils and fabrics. >...
Page 16
TTB517STP by TITAN Care and maintenance 4 Golden rules for servicing > Switch off and remove plug. Clean the ventilation grill and on / off button with a soft brush. > Make sure that the ventilation openings are always clear and clean.
TTB517STP by TITAN Care and maintenance Power cord If the power cord is damaged, it must be replaced by the manufacturer, > its service agent or similarly qualified persons in order to avoid a safety hazard. UK plug If you need to replace the fitted plug, then follow the instructions below.
Page 18
TTB517STP by TITAN Care and maintenance Repair > This product does not contain any parts that can be repaired by the consumer. Contact a qualified specialist to have it checked and repaired. Storage Clean the product as described above. >...
TTB517STP by TITAN Trouble shooting Trouble shooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these...
TTB517STP by TITAN Recycling and disposal Recycling and disposal > Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
Page 21
Standards and technical specifications referred to: EN60745-1:2009+A11:2010 EN60745-2-16:2010 EN55014-1/A2:2011 EN55014-2/A2:2008 EN61000-3-2/A2:2009 EN61000-3-3:2008 Authorised Signatory and technical file holder Date : 19/04/2013 Signature:_________________ Name / title: Peter Harries / Quality Manager Titan Power Tools (UK) Ltd. Trade House, Mead Avenue, BA22 8RT 25MM NAILER/STAPLER TTB517STP...
Need help?
Do you have a question about the TTB517STP and is the answer not in the manual?
Questions and answers
i have a Titan TTB517STP nail/ staple gun , can you tell me which staples and and nails i should use please kind regards Mr Craven ‘from Laceby Grimsby