Table of Contents
Advertisement
Installation and connection
Selecting the location
Positioning the
appliance
8
• Place the appliance in dry and well aired room. The appliance
operates best at temperature ranges indicated in the chart
below. Relevant class of the appliance is indicated on the
rating plate.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base. The
appliance is fi tted with adjustable feet on the front side, used
to level the appliance. Rear side of the appliance is fi tted
with wheels facilitating the positioning of the appliance at the
preselected place (certain models only).
• The element above the appliance must be at least 5 cm away
to allow suffi cient cooling of the condenser.
• Avoid exposing the appliance to direct sunlight or heat
sources. If this is not feasible, install insulation plate between
the appliance and adjacent heat source.
• Bottom front side of the appliance is fi tted with handles to
facilitate relocation. The appliance may stand independently
or adjacent to a furniture element or wall. Be sure to leave
enough space for the opening of the door, to avoid damage to
the appliance or injuries to persons. Also leave ample space
for extracting shelves (see installation diagram).
Ambient temperature
from +10°C to +32°C
from +16°C to +32°C
from +16°C to +38°C
from +16°C to +43°C
Advertisement
Table of Contents
