Table of Contents
Advertisement
The ON/OFF button
Setting freezer
temperature
Rapid freeze function
12
The appliance is switched on by turning the button A towards
Max. Green LED is on. The appliance is switched off when
the arrow on the button points to the ON/OFF mark
appliance, however, is still under mains power).
• Temperature of the appliance is set by turning the button A to
the position between the Min. and Max..
• Recommended setting of the thermostat knob is to Eco
position.
• If the room temperature, in which the appliance is installed, is
lower than 16°C, the recommended setting of the thermostat
knob is to the Max..
• Use this setting after switching on the appliance for the fi rst
time, and when inserting large quantities of unfrozen food (see
"Freezing procedure").
- models with keys: press the E key (orange LED F will
light up). The setting is automatically deactivated after
approximately two days.
- models without keys: rotate the A button to position SF
(rapid freeze) .After approximately two days, the
rapid freeze function is switched off automatically and the
appliance operates at the Max level. To repeat the
rapid freeze procedure, rotate the A button to position
Eco, and then back to SF.
Once the rapid freeze function is automatically deactivated,
return the A button back to the desired position.
(the
Advertisement
Table of Contents
