Table of Contents
Advertisement
26
OPERATION
Control Panel
* Depending on the model, some of the following functions may not be available.
Control Panel Features
LED Display Indicator
Refrigerator Temperature
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
Freezer Temperature
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
To change the temperature mode from °F to °C (or
vice versa).
Press and hold the Refrigerator and Freezer
y
temperature buttons simultaneously for
approximately five seconds.
The temperature indication on the display
window Switches between Celsius and
Fahrenheit.
Dispenser Selection Indicator
Displays whether the dispenser is set to
dispense water, cubed or crushed ice.
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator.
Fresh Air Filter
The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of ten
minutes on and one hundred ten minutes off. If
set to the Power(PWR) mode, the Fresh Air Filter
will stay on continuously for four hours, cycling on
and off in increments of ten minutes on and five
minutes off. After four hours, the Fresh Air Filter
will switch back to Auto mode.
Press the Air Filter button once for
y
Power(PWR) mode.
Press the Air Filter button again to switch
y
back to Auto mode.
NOTE
[
Control Button
]
( On some
models)
Advertisement
Table of Contents
