Frequency/Voltage Control - Gigabyte GA-K8U User Manual

2-7

Frequency/Voltage Control

K8 CPU Clock Ratio
Auto Detect PCI Clk
CPU Clock
CPU OverVoltage Control
DIMM OverVoltage Control
VCC18 OverVoltage Control
VCC12 OverVoltage Control
AGP OverVoltage Control
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
K8 CPU Clock Ratio
Default
x4 800Mhz ~ x10 2000Mhz. Set K8 CPU Clock Ratio from x4 800Mhz to x10 2000Mhz.
Auto Detect PCI Clk
Enabled
Disabled
CPU Clock
200 ~ 232MHz Set CPU clock from 200Mhz to 232Mhz.
CPU OverVoltage Control
Auto
+5%, +7.5%, +10%
DIMM OverVoltage Control
Auto
+0.1V, +0.2V
VCC18 OverVoltage Control
Auto
+5%, +7.5%, +10%
VCC12 OverVoltage Control
Auto
+5%, +7.5%, +10%
AGP OverVoltage Control
Auto
+5%, +7.5%, +10%
GA-K8U Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
[Default]
[Enabled]
[200MHz]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Set K8 CPU Clock Ratio to CPU factory default. (Default value)
Detect PCI clock automatically. (Default value)
Disable this function.
Supply voltage as CPU required. (Default value)
Increase voltage range as user selected.
Supply voltage as DDR module required. (Default value)
Increase voltage range as user selected.
Supply voltage as VCC18 required. (Default value)
Increase voltage range as user selected.
Supply voltage as VCC12 required. (Default value)
Increase voltage range as user selected.
Supply voltage as AGP required. (Default value)
Increase voltage range as user selected.
- 40 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help