LG OLED65G1RLA Owner's Manual page 19

 Connections
Connect various external devices to the TV and switch input modes to select an external device. For more information of external device's connection,
refer to the manual provided with each device.
• When connecting the HDMI cable, the product and external devices should be turned off and unplugged.
HDMI
• Supported HDMI Audio format (Depending on model):
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
If the device connected to Input Port also supports HDMI Deep Colour, your picture may be clearer. However,
Note
if the device doesn't support it, it may not work properly. In that case, change the TV's [HDMI Deep Colour]
setting to off.
→
•
- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0), 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)
- Off: Support 4K @ 50/60 Hz (4:2:0)
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI Cable Types
- Ultra High Speed HDMI
USB
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB
port on the TV directly.
• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick, 18 mm
Note
width and 8 mm a wire diameter. Use an extension cable that supports
USB memory stick does not fit into your TV's USB port.
→ [General] → [Devices] → [HDMI Settings] → [HDMI Deep Colour]
®
/™ cable (3 m or less)
C
B
B
A A
or higher if the USB cable or
* A ≦ 10 mm
* B ≦ 18 mm
* C ≦ 8 mm
19