Tripp Lite B126-1A1-IR Owner's Manual page 8

Troubleshooting
7. Is a splitter, switch or other device in between the computer and
transmitter, or in between the receiver and display? Tripp Lite's
HDMI over Cat5 extender kits are designed for direct connection
between the transmitter and source computer, in addition to a direct
connection between the receiver and the display. If you have a splitter,
switch, or other device in between, it should be removed from the
installation.
8. Check your cabling for any damage that may have occurred during
installation. If a cable connector is loosened as a result of being pulled
through ceilings/walls or the cable jacket is damaged, causing the wiring
to be exposed, you will not be able to achieve maximum performance.
9. Are the transmitter and/or receiver units located in an area
that exposes them to elevated temperatures? If the product is
overheating, it will not function properly.
16-03-172-9334FF.indd 8
8
3/23/2016 9:18:53 AM