LG DLGX9501W Owner's Manual page 25

Connecting Gas Dryers (cont.)
WARNING
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
Failure to do so can result in fire, explosion,
or death.
can result in fire, explosion, or death.
Failure to do so can result in fire,
explosion, or death.
Failure to do so can result in fire,
explosion, or death.
result in fire, explosion, or death.
. Failure to do so can result in
fire, explosion, or death.
do so can result in fire, explosion, or death.
Failure to do so
Failure to do so can
Failure to
Connecting the gas supply
1. Make sure that the gas supply to the laundry room is
turned OFF. Confirm that the type of gas available in
your laundry room is appropriate for the dryer. The
dryer is prepared for Natural Gas with a
gas connection.
2. Remove the shipping cap from the gas connection
the threads of the gas connector when removing the
shipping cap.
3. Connect the dryer to your laundry room's gas supply
using a new flexible stainless steel connector with a
- inch NPT fitting.
4. Securely tighten all connections between the
dryer and your laundry room's gas supply. Turn on
your laundry room's gas supply and check all pipe
connections (both internal and external) for gas leaks
with a noncorrosive leak-detection fluid.
Electrical connection
3/8" NPT Gas
Connection
AGA/CSA-Certified
Stainless Steel Flexible
Connector
High-altitude installations
elevations below 10,000 feet.
If your gas dryer is being installed at an elevation above
10,000 feet, it must be derated by a qualified technician
or gas supplier.
INSTALLATION
3
⁄8 - inch NPT
Plug dryer into a
grounded 3-prong
outlet.
1/8" NPT Pipe
Plug
Gas Supply
Shutoff Valve
25
3
⁄8