Power Management Setup - Gigabyte GA-945PL-S3 User Manual

Parallel Port Mode
SPP
EPP
ECP
ECP+EPP
ECP Mode Use DMA
3
1
2-4

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
ACPI Suspend Type
Soft-Off by PWR-BTTN
PME Event Wake Up
Power On by Ring
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC BACK Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
S3(STR)
Soft-Off by PWR-BTTN
Instant-Off
Delay 4 Sec.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Enabled
Power On by Ring
Disabled
Enabled
Using Parallel port as Standard Parallel Port. (Default value)
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
Set ECP Mode Use DMA to 3. (Default value)
Set ECP Mode Use DMA to 1.
Power Management Setup
[S1(POS)]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Press power button then Power off instantly. (Default value)
Press power button 4 sec. to Power off. Enter suspend if button is
pressed less than 4 sec.
Disable this function.
Enable PME Event Wake up. (Default value)
Disable Power on by Ring function.
Enable Power on by Ring function. (Default value)
- 39 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
BIOS Setup