Step4-3: Jumper Introduction (Only For Pcb Ver.: 2.0) - Gigabyte GA-8SR533 Series User Manual

Step4-3: Jumper Introduction (only for PCB Ver.: 2.0)

1
1) CLR_CMOS (Clear CMOS)#
1-2 close: Clear CMOS
2-3 open: Normal
1
1
Ø You may clear the CMOS data to its default values by this jumper.
"#" Default doesn' t include the "Shunter" to prevent from improper use this
jumper. To clear CMOS, temporarily short 1-2 pin.
- 21 - Hardw are Installation Process