Manually Installing The Monitor Driver - Lenovo D22-10 User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To install the device driver in Microsoft® Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
4. From the Lenovo website www.lenovo.com/support/D22_10, find the corresponding
5. Open the Display Properties window by right-clicking Start, Control Panel, Hardware and
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Have Disk button. By clicking the Browse button, browse and point to the
14. Select the "D22-10.inf" file and click the Open button. Click the OK button.
15. Select Lenovo D22-10 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
1. Press at the bottom of the monitor to open the OSD menu.
2. Use or to select
3. Use or to select Clock and Phase adjustment.
● Clock (pixel frequency) adjusts the number of pixels scanned by one
Horizontal sweep. If the frequency is not correct, the screen shows vertical
Stripes and the picture does not have the correct width.
● Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the picture has horizontal disturbances in light picture.
4. When the image no longer looks distorted, save the Clock and Phase adjustments.
5. Press to leave the OSD menu.
Windows 7 operating system.
monitor driver and download it to a PC to which this monitor is connected (such as a
desktop).
Sound icon, and then click the Display icon.
following path: X:\Monitor Drivers
(Where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)
and corresponding Colour Matching Profiles.
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or
640 x 480 at refresh rate of 60 Hz.
and press to access.
Chapter 3 Reference information 3-4