Cable Lock Slot; Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo D22-10 User Manual

Cable lock slot

Setting up your monitor

This section provides information to help you set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information on page iv before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect the analog signal cable to the D-SUB connector of the monitor and the other end on the
1-3
D22-10 Flat Panel Monitor User's Guide
Your monitor is equipped with a cable lock slot located on the rear of your monitor. Please
follow the instructions that came with the cable lock to attach it.
back of the computer.