Table of Contents
Advertisement
Caring for your monitor
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical
Touch the screen area of your monitor with sharp or abrasive items. This type
Use any cleaner which contains an anti-static solution or similar additives. This
Lightly dampen a soft cloth with water and use this to gently wipe the covers
Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor stand
After placing the monitor face down on a clean surface or soft cloth, Press the release button
to remove the stand and base from the monitor.
Wall Mounting (Optional)
Refer to the instructions that come with the VESA compatible base mounting kit.
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
equipment.
of contact may cause permanent damage to your screen.
may harm the coating of the screen area.
Do:
and the screen.
1.
Place the monitor face down on a non-abrasive surface on stable flat table.
2.
Remove the stand.
3.
Attach the mounting bracket from the wall mounting kit to the monitor.
4.
Mount the monitor on the wall by following the instructions that come with the
base mounting kit.
NOTE: For use only with UL and GS Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 6.00 kg. In order to fulfil TCO Certification for this wall
mounting option, shielded power cable is mandatory to be used.
Chapter 2. Adjusting and Using your monitor 2-8
Advertisement
Table of Contents
