Manually Installing The Monitor Driver - Lenovo 62A3UAR1US User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To install the device driver in Microsoft
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
4. From the Lenovo website https://pcsupport.lenovo.com/solutions/m14t, find the
5. Open the Display Properties window by right-clicking Start, Control Panel, Hardware
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Have Disk button. By clicking the Browse button, browse and point to the
14. Select the "M14t.inf" file and click the Open button. Click the OK button.
15. Select Lenovo M14t and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x
480 at refresh rate of 60 Hz.
Windows 7 operating system.
corresponding monitor driver and download it to a PC to which this monitor is
connected (such as a desktop).
and Sound icon, and then click the Display icon.
following path:
X:\Monitor Drivers\Windows 7
(Where X indicates "the folder in which the downloaded
driver is located" (such as a desktop)
corresponding Colour Matching Profiles.
®
Windows 7, do the following:
Chapter 3.Reference information 3-5