Table of Contents
Advertisement
FOnBoard IDE
Disable OnBoard IDE.
8Disabled
Both Primary & Secondary IDE channel w ill be enabled. (Default Value)
8Both
Only Primary IDE channel is enabled.
8Primary
Only Secondary IDE channel is enabled.
8Secondary
FIDE1 Conductor Cable
Will be automatically detected by BIOS (Default Value)
8Auto
Set IDE1 Conduct o r Cable to ATA66/100 (Please make sure y our IDE dev i c e and
8ATA66/100
cable is compatible w ith ATA66/100)
Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and
8ATA33
cable is compatible w ith ATA33).
FIDE2 Conductor Cable
Will be automatically detected by BIOS (Default Value)
8Auto
Set IDE2 Conduct o r Cable to ATA66/100 (Please make sure y our IDE dev i c e and
8ATA66/100
cable is compatible w ith ATA66/100)
Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and
8ATA33
cable is compatible w ith ATA33).
FOnBoard FDC
Disable this function.
8Disabled
Enable on board floppy disk controller.
8Enabled
Set the floppy disk controller automatically. (Default Value)
8Auto
FOnboard Serial Port A
BIOS w ill automatically setup the port A address. (Default Value)
8Auto
Enable onboard Serial port A and address is 3F8.
83F8/COM1
Enable onboard Serial port A and address is 2F8.
82F8/COM2
Enable onboard Serial port A and address is 3E8.
83E8/COM3
Enable onboard Serial port A and address is 2E8.
82E8/COM4
Disable onboard Serial port A.
8Disabled
- 41 -
BIOS Setup
Advertisement
Table of Contents
