Table of Contents
Advertisement
FCPU/DRAM Base Frequency (MHz)
When set to "H/W TRAP", the CPU/DRAM base frequency will be depend on Original design. You
may also set FSB clock by BIOS. For power End-User use only.
8H/W TRAP
Set CPU /DRAM Base frequency (MHz) to By Hardw are. (Default Value)
866/66 MHz
Set CPU /DRAM Base frequency (MHz) to 66/66MHz
8100/100 MHz
Set CPU /DRAM Base frequency (MHz) to 100/100MHz
8100/133 MHz
Set CPU /DRAM Base frequency (MHz) to 100/133MHz
8100/166 MHz
Set CPU /DRAM Base frequency (MHz) to 100/166MHz
8100/200 MHz
Set CPU /DRAM Base frequency (MHz) to 100/200MHz
8133/100 MHz
Set CPU /DRAM Base frequency (MHz) to 133/100MHz
8133/133 MHz
Set CPU /DRAM Base frequency (MHz) to 133/133MHz
8133/166 MHz
Set CPU /DRAM Base frequency (MHz) to 133/166MHz
FCPU Frequency
This feature allows you to adjust the CPU frequency, When "Linear Frequency Control" is set to
Enabled.
8CPU frequency v alue(200-100, default :100)
FDRAM Frequency
This feature allows you to adjust the DRAM frequency, When "Linear Frequency Control" is set to
Enabled.
8Optionals w ill be changed according to "CPU frequency " v alue. (DRAM Frequency v alue100,
133,200,default:133) This is for CPU Frequency =100.
FAGP Frequency
This feature allows you to adjust the AGP frequency, When "Linear Frequency Control" is set to
Enabled.
8Optionals w ill be changed according to "CPU frequency " v alue. (AGP frequency v alue50,66,
57,80, default :57)This is for CPU Frequency =100.
- 31 -
BIOS Setup
Advertisement
Table of Contents
