Table of Contents
Advertisement
8ARMD FDD
Select y our boot dev ice priority by ARMD FDD.
8ARMD HDD
Select y our boot dev ice priority by ARMD HDD.
FShow Full S creen Logo
Enable show full screen logo function. (Default Value)
8Enabled
Disable show full screen logo function.
8Disabled
FFloppy Drive Seek
During POST, BIOS w ill determine the f l oppy disk driv e installed is 40 or 80 tracks. 360 K ty pe is 40
tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
BIOS searches for floppy disk driv e to determine it is 40 or 80 tracks. Note
8Enabled
that BIOS can not tell from 720 K, 1.2 M or 1.44 M driv e ty pe as they are all
80tracks.
BIOS w ill not search for the ty pe of floppy disk driv e by track number. Note
8Disabled
that there w ill not be any w arning message if the driv e installed is 360 K.
(Default v alue)
FBoot Up NumLock
Key pad is number key s. (Default v alue)
8On
Key pad is arrow key s.
8Off
FPassword Check
Please refer to the detail on P.48
8Alw ay s
The user must enter correct passw ord in order to access the sy stem and/or BIOS
Setup.
The user must enter correct passw ord in order to access BIOS setup utility .
8Setup
(Default Value)
FHDD S.M.A.R.T Capability
Enable HDD S.M.A.R.T. Capability .
8Enabled
Disable HDD S.M.A.R.T. Capability . (Default v alue)
8Disabled
FInterrupt Mode
Through IOAPIC generate more IRQ for sy stem use.(Default v alue)
8APIC
Use AT stantard IRQ controlles to generate IRQ.
8PIC
When y ou already hav e IOAPIC enable sy stem and w ant to upgrade the sy stem please note, since
running an IOAPIC enabled OS (like Window s NT,Window s 2000, Window s XP...) sy stem w ith none
IOAPIC HW support w ill cause the sy stem to hang. Follow ing are some situations users might run into:
1.An IOAPIC enabled OS and change the BIOS setting from IOAPIC to PIC, this w ill cause y our sy stem
to hang.
- 29 -
BIOS Setup
Advertisement
Table of Contents
