Table of Contents
Advertisement
Different sizes of pans can
cause different heat up
times. Heavy pans store
more heat than the light
pans but take more time to
heat up.
6.6 Correct pans for Fry Assist
function
Use only pans with flat bottom. To check
if the pan is correct:
1. Put your pan up side down.
2. Put a ruler on the bottom of the pan.
3. Try to put a coin of 1, 2 or 5 Euro
Cent (or with similar thickness)
between the ruler and the bottom of
the pan.
a. The pan is incorrect if you can
put the coin between the ruler
and the pan.
b. The pan is correct if you can not
put the coin between the ruler
and the pan.
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
6.7 Hints and Tips for
Hob²Hood
When you operate the hob with the
function:
• Protect the hood panel from direct
sunlight.
• Do not spot halogen light on the
hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between
the hob and the hood (e.g. with the
hand, a cookware handle or a tall
pot). See the picture.
The hood in the picture is only
exemplary.
Other remotely controlled
appliances may block the
signal. Do not use any such
appliances near to the hob
while Hob²Hood is on.
Cooker hoods with the Hob²Hood
function
To find the full range of cooker hoods
which work with this function refer to our
consumer website. The AEG cooker
hoods that work with this function must
have the symbol
.
7.1 General information
• Clean the hob after each use.
ENGLISH
17
Advertisement
Table of Contents
