7) IDE1/ IDE2(IDE1/IDE2 Connector)
Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the ribbon cable
must be the same side with the Pin1.
8) IDE3 / IDE4 (RAID/ATA133, Green Connector)
Important Notice: The red stripe of the ribbon cable must be the same side with the Pin1. If you wish to
use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133). Then, install the correct
driver to have proper operation. For details, please refer to the GigaRAID manual.
j For GA-8S655FX Ultra only.
GA-8S655FX Series Motherboard
40
2
(j)
39
40
- 24 -
39
1
1
IDE3
IDE4
2