Power Management Setup - Gigabyte GA-8S648FXM User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
ACPI Suspend Type
Soft-Off by PWR_BTTN
System After AC Back
IRQ [3-7, 9-15], NMI
PME Event Wake Up
Power On by Keyboard
Power On by Mouse
Resume by Alarm
x Month Alarm
x Day (of Month)
x Time (hh:mm:ss)
Power LED in S1 state
: Move Enter:Select +/-/PU/PD:Value F10:Save
F5:Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1. (Default Value)
S3(STR) Set ACPI suspend type to S3.
Soft-off by PWR_BTTN
Off User can press Power button to power off system instantly. (Default Value)
Suspend User can press Power button for 4 seconds to power off system. System will
enter suspend mode if button is pressed less than 4 seconds.
Power Management Setup
[S1(POS)]
[Off]
[Off]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
NA
0
0 : 0 : 0
[Blinking]
F6:Fail-Safe Defaults
Figure 5: Power Management Setup
- 43 -
Item Help
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
ESC:Exit F1:General Help
F7:Optimized Defaults
BIOS Setup