*1 Signals with a l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector. If a signal has no
l in the Plug and play columns but has an entry in the Format column, it can be input. For signals without a l in the Plug and play columns, there
are instances when resolution cannot be selected on the computer even though the projector supports them.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*4 VESA CVT-RB (Reduced Blanking)-compliant
*5 Only for PT-DW750
*6 Samples the pixels in the image processing circuit and projects the image.
*7 Only for PT-DZ780
Note
f The display dot for PT-DZ780 is 1 920 x 1 200, the display dot for PT-DW750 is 1 280 x 800, and the display dot for PT-DX820 is
1 024 x 768. A signal with a different resolution is converted to the number of display dots.
f The "i" at the end of the resolution indicates an interlaced signal.
f When interlaced signals are connected, flickering may occur on the projected image.
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.