Step 2: Install Memory Modules - Gigabyte GA-8PEMT4 User Manual

Step 2: Install memory modules

The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS w ill automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket .The DIMM module can only fit in one direction due to the notch. Memory size can v ary
betw een sockets.
Support Unbuffered DDR DIMM S izes type:
64 Mbit (2M x8x4 banks)
128 Mbit(2Mx16x4 banks)
512 Mbit(16Mx8x4 banks)
Total System Memory (Max2GB)
Not e s: Double-sided x 16 DDR memory dev ices are not support by I n tel 845E/G /PE/GE chipset.
M Please note that the DIMM module can only fit in one direction due to
the two notches. Wrong orientation will cause improper installation.
Please change the i nsert orientation.
64 Mbit (1Mx 16x4 banks)
256 Mbit(8Mx8x4 banks)
512 Mbit(8Mx16x4 banks)
DDR
1. The DI MM socket has a notch, so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module v ertically into the
DIMM socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM
sockets to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
- 11 -
128 Mbit(4Mx8x4 banks)
256 Mbit(4Mx16x4 banks)
Hardware Installation Process