Atop ABLELink GW51C-MAXI Quick Start Manual
Serial server
Hide thumbs
Also See for ABLELink GW51C-MAXI:
- User manual (68 pages) ,
- Quick start manual (4 pages) ,
- User manual (68 pages)
Related Manuals for Atop ABLELink GW51C-MAXI
Summary of Contents for Atop ABLELink GW51C-MAXI
- Page 1 ® ABLELink GW51C-MAXI Serial Server Quick Start Guide Version 1.3 Updated on February, 2008. TEL: 886-3-5508137 FAX: 886-3-5508131 http://www.atop.com.tw...
- Page 2 3 pins Terminal Block for Power Connector x 1 Mini DIN to DB-9 Cable x 1 Wall mount kits x 2 Atop Wireless Serial Server quick start guide x 1 Product CD containing configuration utility x 1 Product Warranty card x 1 Optional Accessories：...
- Page 3 Quick Start Guide Version 1.3 GW51C-MAXI Serial Server Jumper JP1 pin1 and pin2 are short to disable AP firmware in LED on the flash memory. LED blinking (rate: 0.5Sec) AP firmware is running Installation Procedures MODE Switch This sets or initializes operating mode for the Serial Server. The factory default setting is that Switch 1 (SW1) and Switch 2 (SW2) are set to OFF.
- Page 4 SG (Signal Ground) DATA- RXD- N/A (reserved) TXD- Customer Services and Supports Contact your local dealers or ATOP Technical Support Center at the following numbers. +886-3-550-8137 (ATOP Taiwan) +86-21-6495-6232 (ATOP China) Report the errors via Atop’s Web site or E-mail account www.atop.com.tw...
Need help?
Do you have a question about the ABLELink GW51C-MAXI and is the answer not in the manual?
Questions and answers