Sony SO-01G Instruction Manual page 38

Open the microUSB jack cover and
1
insert the microUSB plug of the AC
adapter horizontally into the
microUSB jack of the terminal with
the engraved side (B) facing up.
Unfold the power plug of the AC
2
adapter and insert it into an outlet.
Notification LED of the terminal turns
･
on (P.45).
When charging is complete,
3
remove the power plug of the AC
adapter from the power outlet.
Remove the microUSB plug of the
4
AC adapter evenly from the
terminal.
Close the microUSB jack cover,
5
firmly press it and make sure that
there are no gaps between the
terminal and cover.
❖ Note
Check the connecting direction to connect correctly.
･
Wrong connection may cause damage.
Charging with DC adapter
DC Adapter 03/04 (optional) supplies power
from a car cigarette lighter socket (12V/24V).
For details, refer to the DC Adapter 03/04
manual.
Charging with a PC
When using Micro USB Cable 01 (optional) for
charging, do the following procedures.
Opening/closing microUSB jack cover (P.25)
･
Notification
LED
USB plug
Open the microUSB jack cover and
1
insert the microUSB plug of the
microUSB cable horizontally into
the microUSB jack of the terminal
with the engraved side (
facing up.
Insert the USB plug of the
2
microUSB cable into a USB port of
a PC.
Notification LED of the terminal turns
･
on (P.45).
When "Install software" screen appears
･
on the terminal, tap [Skip].
Before Using the Terminal
microUSB plug
microUSB cable
)
36