External Device Connection; Connecting To Pc - Sony SO-01G Instruction Manual

External device connection

Connecting to PC

Connect a PC to exchange data between the
internal storage or the microSD card and a
PC.
❖ Information
Appeared screen may vary depending on the
･
operating system (OS) of a PC.
You may not be able to operate copyrighted data of
･
images, music, etc.
Connecting a PC using a
microUSB cable
The following operating systems (OS) are
･
supported.
- Microsoft Windows 8/8.1
- Microsoft Windows 7
- Microsoft Windows Vista
The terminal is connected by "Media transfer
･
mode (MTP)" which is set by default.
For using Mass storage mode (MSC) etc.,
･
attach a microSD card to the terminal (P.177).
Charging starts when the terminal is
･
connected to a PC.
Connect the terminal to a PC using
1
a microUSB cable (P.36).
When you connect microUSB cable for
･
the first time, the driver software for the
terminal is installed to a PC. Wait for a
while until installation is completed.
When "Install software" screen appears
･
on the terminal, tap [Skip].
Media transfer mode (MTP)
■
The terminal is displayed on the PC
screen as a portable device and you can
access the internal storage and a microSD
card in the terminal.
Mass storage mode (MSC)
■
The terminal is displayed on the PC
screen as a removal disk and you can
access the microSD card in the terminal.
❖ Information
From the Home screen,
･
u
Connectivity] [USB Connectivity] to check
connection mode and change the following settings.
Install software Display the software installation
wizard when connected to a PC.
USB connection Switch USB connection modes
mode when connecting to a PC.
WIRELESS MEDIA Connect the terminal and a host
TRANSFER device in a pair via Wi-Fi network
(P.186).
External device connection
u u
[Settings] [Xperia
™
185