Table of Contents
Advertisement
Advanced
Wi-Fi
optimization
Auto IP support Enable/disable Auto IP
Passpoint
Passpoint
networks
MAC address
IP address
Using Wi-Fi Direct compatible device
You can connect among the devices
compatible with Wi-Fi Direct via Wi-Fi even
without configuring access point.
Turn Wi-Fi on beforehand (P.149).
･
From the Home screen,
1
u
[Settings]
u
[Wi-Fi Direct].
2
Select a Wi-Fi Direct compatible
3
device name to connect.
Tap [Search for devices] to refresh the
･
detection list.
To change the terminal name displayed
･
on the detected Wi-Fi Direct
compatible device, tap [Rename
device].
Set whether to control
the battery power
consumption when
Wi-Fi is on.
function.
Set whether to
connect to available
Passpoint network
automatically.
Set Passpoint network.
Check MAC address.
Check IP address.
u
[Wi-Fi].
❖ Information
Wi-Fi function becomes available when you install a
･
compatible application.
Data usage
Enable/disable mobile data communication
or set data usage limit.
Enabling mobile data
communication
From the Home screen,
1
u
[Settings]
Tap
of Mobile data
2
communication or drag it to the
right.
Read the note and tap [OK].
3
Setting data usage limit
From the Home screen,
1
u
[Settings]
[Set mobile data limit]
2
notes and tap [OK].
u
[Data usage].
u
[Data usage].
u
Read the
Settings
151
Advertisement
Table of Contents
