JL Audio Fathom IWSv2-SYS-113 Owner's Manual page 25

Table of Contents

Advertisement

SYSTEM CONNECTION DIAGRAM 3:
One Fathom IWSv2 in Mono to
Two-Channel Audio System
When connecting a Fathom IWSv2
(or multiple Fathom IWSv2s) in mono to
a two-channel audio system you will use
both the "Left or Mono" and the "Right"
inputs. Summing circuitry in the Fathom
IWSv2's input section will sum the stereo
signals to mono.
We strongly recommend that you
use a high-quality active crossover to
divide your preamplifier's signals prior
to connection to the Fathom IWSv2
and to the amplifier driving your main
speakers. This will allow you to filter low
frequencies out of the signals driving
the main speakers, resulting in better
performance.
If you are not using an active crossover
and are comfortable running your main
speakers full-range, you can split your
preamplifier's output signals using
appropriate Y-connectors in place of the
active crossover shown in the diagram.
Two connection types are available
for connecting the Fathom IWSv2 to
your two-channel audio system: balanced
(XLR or 1/4-inch TRS connector) and
unbalanced (RCA-type connector).
Balanced connections provide superior
noise rejection and ensure proper
grounding between components. If your
preamplifier or active crossover offers
balanced outputs, we highly recommend
that you use them.
In the connection diagram at left,
balanced connections are shown as solid
lines, unbalanced connections are shown
dotted. You will only use one of these
input connection methods (not both).
NOTE: If desired, additional Fathom
IWSv2s can be connected in "Slave"
mode to the Fathom IWSv2 connected as
shown on this diagram. See "Connection
Diagram 2" on page 24 for slave
connection explanation.
WARNING
| Fathom IWSv2
STEREO ACTIVE CROSSOVER (BALANCED OUTPUTS)
LOW OUT
(SUB OUT)
WARNING! TURN OFF THE FATHOM IWSv2 AND ALL OTHER EQUIPMENT
IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
STEREO ACTIVE CROSSOVER (UNBALANCED OUTPUTS)
OR
FATHOM REAR CONTROLS (MASTER)
FATHOM REAR CONTROLS (MASTER)
LOW OUT
(SUB OUT)
LEFT
RIGHT
Page 25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fathom iwsv2-sys-213

Table of Contents